Tutorial on setting up Sierra Wireless Air Vantage with your Custom IoT Device

Prelude The challenge is to create a system for air quality sensing which can operate without human intervention. My idea is to create a system that can measure air quality indoors and outdoors and log this data to the Sierra Wireless System. For the indoor unit, I have a CC3200 power unit which can measure... Continue Reading →

Seeedstudios Groove Pi+ Pre-Review Part 1

Introduction SeeedStudios has their own system of prototyping hardward called Grove which uses four pin connectors to connect sensors, actuators and subsystems together to a central controller which can be arduino based or MSP430 based. Recently, they have introduced an interface to the Rapberry Pi called the grovepi+ which is a Raspberry Pi Hat with... Continue Reading →

A guide to the CC3200

Prelude The challenge is to create a system for air quality sensing which can operate without human intervention. My idea is to create a system that can measure air quality indoors and outdoors and log this data to the Sierra Wireless System. For the indoor unit, I have a CC3200 power unit which can measure... Continue Reading →

IoT Holiday Lights – Final Build

Preface My project for the Internet of Holoday lights was based around our living room which was not very livable. It was a mess and with the upcoming holidays I wanted to set the living room in such a way that it would be suitable for entertaining guests. Additionally I wanted to accomplish the above... Continue Reading →

Blog at WordPress.com.

Up ↑